VEREINIGTE FÜLLKÖRPER-FABRIKEN
GmbH & Co. KG
Your Expert for Tower Packings and
Column Internals

 

COLUMN INTERNALS: Liquid Distributors Liquid Distributor

Liquid distributors or redistributors should be selected according to the operating conditions and the type of packing used. We therefore offer a wide range of different designs and materials and would be happy to advise on the selection of a suitable type for your application.

Ceramiv (ACIDUR^®-special stonware and others), Metals (Carbon Steel, Stainless Steels, alloys, etc.)
Plastics (PE,PP, PVC, C-PVC, PVDF, PTFE etc.)

Produktbezeichnung	Typ	Foto	Bemerkung
Weir riser-pan distributor (Liquid distributor)	FL-03-K, M, P		Inexpensive, suitable also for very unclean liquids
Orifice-pan distributor (Liquid distributor)	FL-04-M, P		Very inexpensive, suitable for moderately unclean liquids, modification with built-in tubes
Orifice-pan distributor (Liquid distributor)	FL-06-M, P Sonderausführung		Suitability as FL-04, but greater gas capacity
Ring channel pan distributor with orifices and down pipes (Liquid distributor)	FL-05-M, P		Recommended for operation conditions higher than approx. 65 % flooding factor; also applicable for unclean liquids
Weir through-distributor (Liquid distributor)	FL-10-K, M, P		Inexpensive; several main distributors; suitable for clean and unclean liquids
Weir through-distributor (Liquid distributor)	FL-12-M		Suitable for medium to high liquid volumes and low to medium gas volumes.
Through-distributor with orifices and down pipes (Liquid distributor)	FL-20-M, P		Recommended for operation conditions higher than approx. 65 % flooding factor, suitable for clean and moderate unclean liquids and greater load range.
Orifice deck distributor (Liquid distributor)	FL-30-M, P		Several main distributors; suitable for clean and moderably unclean liquids
Orifice deck distributor (Liquid distributor)	FL-32-M		Suitability as FL-30, but better for unclean liquid and greater load range.
Orifice deck redistributor: with covers (Liquid distributor)	RV-30-M, P		Suitable for clean and moderately unclean liquids
Ladder pipe distributor with central header pipe (Liquid distributor)	FL-50-M, P		Suitable for clean and unclean liquids; pre-pressure necessary ( <200 mbar)
Chevron collector (Liquid distributor)	FS-10-M		Liquid collector for medium cross sections and medium to large gas capacity
Redistributor rosette (Liquid distributor)	RV-03-M, P		Wall scraper for application with smaller cross sections, high beds and 1st or 2nd generation packings
Special designs of Liquid distributors		ohne	Modifi cations of the distributor e. g. larger turn down, min./max. irrigation density, reduced fouling susceptility, various pre-distributor systems, designs etc.

[Impressum] [Site Map]